Five Points You Need to Pay Attention to While Installing a Sink
2021-11-29 10:15:14
Firstly, leave enough space on the counter. The space should be consistent with the volume of the sink. You need to figure out what the size of the sink you have purchased is before installation in case of reworking. What's more, it's recommended that you shouldn't start to install the sink until the whole kitchen is decorated.
Secondly, make sure it's firm enough in the joint part while connecting the outlet pipe on the faucet to the inlet switch. Any seams, no matter how thin they are, may cause big trouble in the future. Meanwhile, don't mistake the position of the cold and hot pipe.
Thirdly, don't forget to conduct a drainage test. Fill the sink with water, test the drainage of the filter basket and overflow hole. You should rework it immediately if water seepage is found.
Fourthly, install hanging pieces between the sink and the counter. This is to avoid the shaking of the sink caused by small gaps.
Finally, ensure that the joint gap between the sink and the counter is uniform when sealing the edge with silica gel.
Hot Tag:
Secondly, make sure it's firm enough in the joint part while connecting the outlet pipe on the faucet to the inlet switch. Any seams, no matter how thin they are, may cause big trouble in the future. Meanwhile, don't mistake the position of the cold and hot pipe.
Thirdly, don't forget to conduct a drainage test. Fill the sink with water, test the drainage of the filter basket and overflow hole. You should rework it immediately if water seepage is found.
Fourthly, install hanging pieces between the sink and the counter. This is to avoid the shaking of the sink caused by small gaps.
Finally, ensure that the joint gap between the sink and the counter is uniform when sealing the edge with silica gel.
Hot Tag:
